Objective:- To test a LDR as darkness detector
and operating a transistor as a switch.
Equipments
required:-1) power supply 5V, Bread board
Components:-1)
LDR, Transistor BC548, LED,resistors-100k, 330Ω.
Theory:- A
light dependent resistor or LDR can be used to detect darkness. The resistance
of a LDR depends on the light falling on it. So it has a dark resistance and
light resistance. This change in resistance drives a transistor into cutoff and
saturation. Here the transistor acts as a switch.
Circuit
diagram:-
Procedure:-1)
measure the LDR resistance in dark and light
2) measure the Vce,Vbe,Ic
when LDR is in darkness and when in light
I am really impressed read your blog. Actually, your blog article is very helpful and more informative.Thank for sharing your valuable information. Such an insightful and long post almost intimidating for us newbie bloggers. Grateful for the effort you took to write this post. Lot’s to think about and get going with. Thank you.
ReplyDeleteWe provide a variety of hacking services, such as social media account hacks, mobile phones / PC hacking, email accounts hacking or anything else customer may want. Details check Awaken Cybers
The article is much information which I was searching for. Nice intro good explanation thanks for sharing.
ReplyDeleteDifference Between Passive and Active Components?
This comment has been removed by the author.
ReplyDeleteLDRs can be utilized to sense darkness and trigger appropriate responses in systems. For example, in street lighting applications, LDRs can be used to detect the ambient light levels and automatically turn on or adjust the intensity of streetlights as darkness sets in.
ReplyDeleteFreture Techno
This comment has been removed by the author.
ReplyDeleteYour Post Proved to be very helpful for me thank you for sharing ..
ReplyDeleteWhat are the Process of Choosing a Right Computer Institute In City of Delhi?
Your blog is very informative Artificial Intelligence
ReplyDelete